There are three main methods of fixing the toilet. The first method is as follows: it can simply be fixed to a cement or tile floor with screws. The second method is much more difficult, but more reliable. Fastening is made to a wooden board. Such a board is made, in other words – taffeta, from a fairly durable and well-oiled wood. Anchors are installed in the floor from below, for the reliability of fastening the taffeta. The simplest anchors are nails. They are driven into the board in a checkerboard pattern and protrude from it by three centimeters. The recess in the floor is filled with sand-cement mortar. Taffeta is sunk into this recess, compared with the floor. After this solution hardens, the toilet is fixed with ordinary screws, greased with grease, so that over time they can be easily unscrewed.
Where to start when you want to install a toilet with your own hands?
It is advisable to put rubber washers under the screw heads. This is necessary so that the toilet frame is not damaged. The third option involves installing the toilet with epoxy adhesive, which will provide a secure grip between the toilet and the floor. To do this, the surfaces to be bonded must be thoroughly cleaned and degreased. To form a roughness, use a corundum stone to process and degrease again. Resin is applied to the prepared support surface, approximately 4-5 millimeters thick, then the toilet is pressed to the floor. It is necessary to withstand at least 12 hours for the epoxy resin and mortar to cure.
After the toilet installation procedure, it should be connected to the outlet line. The last final operation is the connection of the cistern.
Oddly enough, but a man must be able to install the toilet on his own, since women’s hands are not intended for this. But as most people do, you can simply invite a master who will be happy to create such a masterpiece for you.
Remember that from the moment you choose your toilet, you are already building your future bathroom. Prepare all necessary equipment, appliances and tools. Most often, the presence is important here: screwdrivers, pliers, a mixer, if attached, well, nuts and bolts. Usually in the kit, half of everything listed is attached.
After reading all the above recommendations, you will understand how to install a toilet bowl with your own hands, in fact, there is nothing complicated here, the main thing is not to be afraid of work and try to do everything yourself in order to be able and confirm that you are the owner of your home.
